Overview
AeroWolf is proud to announce its dry type oil free air compressor in 2016 and this remarks AeroWolf ‘s significance in providing varied solutions and quality product by equipping GHH air end to make sure its output performance and high durability. With the fast development, until now, AeroWolf is among top 3 among all Chinese supplier. Maybe you are not
Key Details
familiar with the dry type oil free compressor, wondering how it works. Oil free screw air compressor are positive-displacement, 2 stage air compressors. In this regards, each of the air end will involve the compression stages as air intake, sealing, compression and final air discharge, no need water or oil for lubrication. The compressed air from the first stage air end will flow through middle cooler for cooling down the inlet air into to the second stage air end, before cooling down compressor into second stage air end, it will flow through a moisture trap avoiding too much moisture into
Practical Points
the air end causing corrosion even the second stage air end is made of stainless steel. Then final compressed air will flush into after cooler. During the compression stage, the lubricated oil lubricating the gear box and the gear is also in its circle.
What This Means for Buyers
Air quality matters as much as air quantity. Contaminants such as water, oil aerosols and particles can damage tools, spoil product and shorten downstream equipment life. The required purity level depends on the process, from general plant air to strict food and pharmaceutical standards. Operators should record pressure, temperature and running hours daily. A small change in these readings often signals an issue before a failure occurs, which is cheaper to fix than an emergency repair.
How to Select the Right Equipment
Start with the actual air demand. Record the required flow, working pressure, voltage, ambient conditions and duty cycle, then add a safety margin. Match the compressor type to the application. A variable speed drive machine suits changing demand, while a fixed speed machine suits steady full load. For clean processes, an oil free unit or proper filtration is required.
Common Mistakes to Avoid
- Sizing a compressor from the motor nameplate instead of measured flow.
- Ignoring air quality and allowing water or oil into the system.
- Skipping preventive maintenance and waiting for a breakdown.
- Choosing the lowest price without comparing lifecycle energy cost.
Maintenance and Reliability
A routine service plan keeps output stable and protects the airend, motor and controls. Drain condensate, change filters on schedule, check belts and couplings, and inspect for leaks. A well maintained compressor holds its efficiency and avoids costly unplanned stops.
Next Steps
For help selecting or sizing a system, review the Oil-free Compressor and Screw Air Compressor, or contact AeroWolf with your flow, pressure and air quality requirements.
A clear specification avoids expensive rework. Document the air quality class, the peak and average flow, the pressure band, the power supply and the expected operating hours before asking for a quote.
Compressed air is one of the most common utilities in a factory, yet it is often the least audited. A pressure of 0.1 bar above the requirement already adds measurable energy cost across a full year of operation.
Leakage is a hidden cost. Even a small leak wastes air around the clock. A regular walk through inspection with an ultrasonic detector finds leaks early and pays for itself quickly.
Ambient conditions change the output of a compressor. High intake temperature, high altitude and poor ventilation reduce flow, so the installation room should be cool, clean and well ventilated.