Overview
10 Regularly precautions of air compressor: 1. Operation and maintenance of the air compressor must be responsible by qualified personnel. 2. When disassembling the high temperature components, it must be carried out after the temperature is cooled to the ambient temperature. 3. It is recommended to use clean and qualified lubricating oil for screw compressors . Different grades of lubricants
Key Details
are not allowed to be mixed, it may cause machine fails. 4. without the permission of the manufacturer, do not make any changes to the compressor that affect safety, reliability or add any additional device. 5. The original spare parts of the compressor are specially designed and manufactured. It is recommended to use original spare parts to make sure the reliability and safety of the compressor work. 6. Absolutely not allowed to block the suction port of the compressor during the operation. 7. Most air compressor is produced for industry use, never allowed for breathe use, unless some special compressor
Practical Points
produced for breathing. 8. Once the compressor is found to be operating abnormally, stop the compressor immediately and eliminate the abnormality in time, and contact supplier once any problem can’t be handled. 9. Maintain and repair the compressor with the correct tools & ways, it can make sure the good output performance and long use life. 10. After repair and before starting, confirm that all safety devices have been reinstalled and the tools have been removed from the compressor.
What This Means for Buyers
Compressed air systems must be sized for the real air demand, not the maximum connected load. Oversizing wastes energy, while undersizing causes pressure drops and short cycling. A proper audit looks at flow in cubic meters per minute, working pressure in bar, duty cycle, ambient temperature and air quality class. Operators should record pressure, temperature and running hours daily. A small change in these readings often signals an issue before a failure occurs, which is cheaper to fix than an emergency repair.
How to Select the Right Equipment
Start with the actual air demand. Record the required flow, working pressure, voltage, ambient conditions and duty cycle, then add a safety margin. Match the compressor type to the application. A variable speed drive machine suits changing demand, while a fixed speed machine suits steady full load. For clean processes, an oil free unit or proper filtration is required.
Common Mistakes to Avoid
- Sizing a compressor from the motor nameplate instead of measured flow.
- Ignoring air quality and allowing water or oil into the system.
- Skipping preventive maintenance and waiting for a breakdown.
- Choosing the lowest price without comparing lifecycle energy cost.
Maintenance and Reliability
A routine service plan keeps output stable and protects the airend, motor and controls. Drain condensate, change filters on schedule, check belts and couplings, and inspect for leaks. A well maintained compressor holds its efficiency and avoids costly unplanned stops.
Next Steps
For help selecting or sizing a system, review the Screw Air Compressor and Compressed Air Solutions, or contact AeroWolf with your flow, pressure and air quality requirements.
A clear specification avoids expensive rework. Document the air quality class, the peak and average flow, the pressure band, the power supply and the expected operating hours before asking for a quote.
Compressed air is one of the most common utilities in a factory, yet it is often the least audited. A pressure of 0.1 bar above the requirement already adds measurable energy cost across a full year of operation.
Leakage is a hidden cost. Even a small leak wastes air around the clock. A regular walk through inspection with an ultrasonic detector finds leaks early and pays for itself quickly.