Overview
AeroWolf Oil Injected Rotary Screw Air Compressor DA-160 2 units sooner will start their service for the new plant in Vietnam this year. These two units air compressors were finished in May. Last month, we had the opportunity to come to on site for checking these two models. AeroWolf values every client, we response real fast, we are professional, we
Key Details
supply safe and secure air compressors . At AeroWolf , we earn our buyer’s trust and satisfaction by manufacturing the superior quality compressed air products for all industries. All of our products are designed for reliable output performance and easy maintenance. AeroWolf exported to 136 countries, and to support every client, we have a well trained technical team provides 7/24/365 service. Committed to offering our buyers worry-free compressed air systems, high availability and a delightful user experience of our products. AeroWolf compressor DA-160 * 2 Units Air flow: 26.29m3/min Working pressure: 8.5bar
What This Means for Buyers
Compressed air systems must be sized for the real air demand, not the maximum connected load. Oversizing wastes energy, while undersizing causes pressure drops and short cycling. A proper audit looks at flow in cubic meters per minute, working pressure in bar, duty cycle, ambient temperature and air quality class. Real application cases show how flow, pressure and air quality requirements differ from site to site, and why a matched solution performs better than a standard unit.
How to Select the Right Equipment
Start with the actual air demand. Record the required flow, working pressure, voltage, ambient conditions and duty cycle, then add a safety margin. Match the compressor type to the application. A variable speed drive machine suits changing demand, while a fixed speed machine suits steady full load. For clean processes, an oil free unit or proper filtration is required.
Common Mistakes to Avoid
- Sizing a compressor from the motor nameplate instead of measured flow.
- Ignoring air quality and allowing water or oil into the system.
- Skipping preventive maintenance and waiting for a breakdown.
- Choosing the lowest price without comparing lifecycle energy cost.
Maintenance and Reliability
A routine service plan keeps output stable and protects the airend, motor and controls. Drain condensate, change filters on schedule, check belts and couplings, and inspect for leaks. A well maintained compressor holds its efficiency and avoids costly unplanned stops.
Next Steps
For help selecting or sizing a system, review the Screw Air Compressor and Compressed Air Solutions, or contact AeroWolf with your flow, pressure and air quality requirements.
A clear specification avoids expensive rework. Document the air quality class, the peak and average flow, the pressure band, the power supply and the expected operating hours before asking for a quote.
Compressed air is one of the most common utilities in a factory, yet it is often the least audited. A pressure of 0.1 bar above the requirement already adds measurable energy cost across a full year of operation.
Leakage is a hidden cost. Even a small leak wastes air around the clock. A regular walk through inspection with an ultrasonic detector finds leaks early and pays for itself quickly.
Ambient conditions change the output of a compressor. High intake temperature, high altitude and poor ventilation reduce flow, so the installation room should be cool, clean and well ventilated.
Downstream equipment benefits from stable pressure. A correctly sized receiver tank and good piping reduce pressure fluctuations and help the compressor run in a steady, efficient range.
Remote monitoring adds control. Modern controllers report running hours, pressure and alarms, which helps maintenance teams plan service instead of reacting to failures.
For international buyers, export packaging, documentation and local voltage compatibility all matter. Confirm these details early so delivery and installation go smoothly.