Overview
Project Name: Geothermal well drilling in Kangasala, Finland Product Name: 33m3/min 35bar skid-mounted diesel screw air compressor with Geothermal well drilling rig hole depth 200M Model No. & Qty: DACY-33/35 x 1, DGL-150R x 1 Working Time: From July, 2015 till now Event: In November, 2014, AeroWolf distributor Mr. Jukka and his clients from Finland visited AeroWolf facotry for 3
Key Details
days. We had a pleasant time with these distinguished buyers. At the first day, Mr Jukka and his clients checked air compressor production lines, and talked about the customized technical solution with our engineers about skid-mounted diesel screw air compressor for their geothermal well drilling project. The next day we confirmed the customized technical solution for geothermal well drillng rig. Then we talked about the details of cooperation and signed the contract at the third day. This customized skid-mounted diesel screw air compressor is the biggest model in our diesel screw air compressor series, operating pressure 35bar 508psi, free air
Practical Points
delivery 33m3/min 1165cfm, the hole depth of geothermal well drilling rig is 200m. Both the air compressor and drilling rig are approved CE certificate. This successful project will pave a good way for AeroWolf products to support the Europe market. For further information please contact: Wayne Wang, PR Coordinator, E-mail: wayne@denaircompressor.net
What This Means for Buyers
Compressed air systems must be sized for the real air demand, not the maximum connected load. Oversizing wastes energy, while undersizing causes pressure drops and short cycling. A proper audit looks at flow in cubic meters per minute, working pressure in bar, duty cycle, ambient temperature and air quality class. Real application cases show how flow, pressure and air quality requirements differ from site to site, and why a matched solution performs better than a standard unit.
How to Select the Right Equipment
Start with the actual air demand. Record the required flow, working pressure, voltage, ambient conditions and duty cycle, then add a safety margin. Match the compressor type to the application. A variable speed drive machine suits changing demand, while a fixed speed machine suits steady full load. For clean processes, an oil free unit or proper filtration is required.
Common Mistakes to Avoid
- Sizing a compressor from the motor nameplate instead of measured flow.
- Ignoring air quality and allowing water or oil into the system.
- Skipping preventive maintenance and waiting for a breakdown.
- Choosing the lowest price without comparing lifecycle energy cost.
Maintenance and Reliability
A routine service plan keeps output stable and protects the airend, motor and controls. Drain condensate, change filters on schedule, check belts and couplings, and inspect for leaks. A well maintained compressor holds its efficiency and avoids costly unplanned stops.
Next Steps
For help selecting or sizing a system, review the Screw Air Compressor and Compressed Air Solutions, or contact AeroWolf with your flow, pressure and air quality requirements.
A clear specification avoids expensive rework. Document the air quality class, the peak and average flow, the pressure band, the power supply and the expected operating hours before asking for a quote.
Compressed air is one of the most common utilities in a factory, yet it is often the least audited. A pressure of 0.1 bar above the requirement already adds measurable energy cost across a full year of operation.
Leakage is a hidden cost. Even a small leak wastes air around the clock. A regular walk through inspection with an ultrasonic detector finds leaks early and pays for itself quickly.
Ambient conditions change the output of a compressor. High intake temperature, high altitude and poor ventilation reduce flow, so the installation room should be cool, clean and well ventilated.