AeroWolf DA-37 screw air compressor delivery work

Overview

Today we have one 37kw oil-injected screw air compressor dressed up, it is ready to deliver to Saudi Arabia, the application is for one painting manufacturing facility, providing the compressed air to drive the painting equipment. For Mid-east market, because of the high temperature, we will special design the machine,especially the radiator parts, which are specially enlarged for this area,

Key Details

And we all understand that high heat for compressors is large problem, so when buyers, who are from high temperature area, buy our air compressors , we usually suggest our customers to use the lubrication oil with high flash point for better and safer operating condition We hope all of our clients could have the great experience with our products and embrace with happiness that they made the right decision everyday, and AeroWolf is always on our way to committed to offer supply efficient and intelligent solutions and products. Here are the delivery pictures,the machine information is: Double screw air

Practical Points

compressor DA-37 Free air delivery: 220.7CFM Max. operating pressure: 8.5bar Motor power: 37KW/50HP Voltage: 380V/3ph/60Hz Refrigerated air dryer DAD-8HTF Air flow: 8.5 Nm3/min Inlet pressure: 4 ~ 13bar Dew point: 2 ~ 10℃ Voltage: 220V/1ph/60Hz Mainline filters Pre-filter C-008 Extractive filter T-008 Super extractive filter A-008

What This Means for Buyers

AeroWolf keeps investing in engineering, manufacturing and global support. Company updates like exhibitions, factory milestones and partnerships are shared so that distributors and end users can follow the brand and plan cooperation.

How to Select the Right Equipment

Start with the actual air demand. Record the required flow, working pressure, voltage, ambient conditions and duty cycle, then add a safety margin. Match the compressor type to the application. A variable speed drive machine suits changing demand, while a fixed speed machine suits steady full load. For clean processes, an oil free unit or proper filtration is required.

Common Mistakes to Avoid

  • Sizing a compressor from the motor nameplate instead of measured flow.
  • Ignoring air quality and allowing water or oil into the system.
  • Skipping preventive maintenance and waiting for a breakdown.
  • Choosing the lowest price without comparing lifecycle energy cost.

Maintenance and Reliability

A routine service plan keeps output stable and protects the airend, motor and controls. Drain condensate, change filters on schedule, check belts and couplings, and inspect for leaks. A well maintained compressor holds its efficiency and avoids costly unplanned stops.

Next Steps

For help selecting or sizing a system, review the Air Treatment and Screw Air Compressor, or contact AeroWolf with your flow, pressure and air quality requirements.

A clear specification avoids expensive rework. Document the air quality class, the peak and average flow, the pressure band, the power supply and the expected operating hours before asking for a quote.

Compressed air is one of the most common utilities in a factory, yet it is often the least audited. A pressure of 0.1 bar above the requirement already adds measurable energy cost across a full year of operation.

Leakage is a hidden cost. Even a small leak wastes air around the clock. A regular walk through inspection with an ultrasonic detector finds leaks early and pays for itself quickly.

Ambient conditions change the output of a compressor. High intake temperature, high altitude and poor ventilation reduce flow, so the installation room should be cool, clean and well ventilated.

Downstream equipment benefits from stable pressure. A correctly sized receiver tank and good piping reduce pressure fluctuations and help the compressor run in a steady, efficient range.

Remote monitoring adds control. Modern controllers report running hours, pressure and alarms, which helps maintenance teams plan service instead of reacting to failures.

WhatsApp Email Phone