Overview
The following photos are the AeroWolf DAH-132/35 high pressure double stage compression air compressor which will be shipped to Serbia, its double stage compression air end can deliver 10.5m3/min compressed air at the pressure of 35bar with the lower compression ratio, it equipped with a 132kw electric motor with high efficiency of 95.6%, the neat and reasonable structure design make
Key Details
the compressor with good ventilation and heat dissipation. AeroWolf high pressure double stage compression air compressor is adopted stainless steel pipeline in all the air flow lines, it keep the low pressure drop inside the air line system and the stainless steel pipeline will work longer time especially when the ambient temperature is high in summer. The patent oil gas tank design reduces the pressure drop inside the oil gas tank and makes the separating effect better. In compressor industry, the low pressure drop and flow air lose is the most essential part for the energy efficiency of the air
Practical Points
compressor , all these details have decide our compressor under the standard of the 1st class energy efficiency index. The smart touch screen also worked in this high pressure air compressor , USB and LAN are also available for the compressor control panel, it’s more convenient for the buyers to know it’s operating situation and control it more easily.
What This Means for Buyers
AeroWolf keeps investing in engineering, manufacturing and global support. Company updates like exhibitions, factory milestones and partnerships are shared so that distributors and end users can follow the brand and plan cooperation.
How to Select the Right Equipment
Start with the actual air demand. Record the required flow, working pressure, voltage, ambient conditions and duty cycle, then add a safety margin. Match the compressor type to the application. A variable speed drive machine suits changing demand, while a fixed speed machine suits steady full load. For clean processes, an oil free unit or proper filtration is required.
Common Mistakes to Avoid
- Sizing a compressor from the motor nameplate instead of measured flow.
- Ignoring air quality and allowing water or oil into the system.
- Skipping preventive maintenance and waiting for a breakdown.
- Choosing the lowest price without comparing lifecycle energy cost.
Maintenance and Reliability
A routine service plan keeps output stable and protects the airend, motor and controls. Drain condensate, change filters on schedule, check belts and couplings, and inspect for leaks. A well maintained compressor holds its efficiency and avoids costly unplanned stops.
Next Steps
For help selecting or sizing a system, review the Air Treatment and Screw Air Compressor, or contact AeroWolf with your flow, pressure and air quality requirements.
A clear specification avoids expensive rework. Document the air quality class, the peak and average flow, the pressure band, the power supply and the expected operating hours before asking for a quote.
Compressed air is one of the most common utilities in a factory, yet it is often the least audited. A pressure of 0.1 bar above the requirement already adds measurable energy cost across a full year of operation.
Leakage is a hidden cost. Even a small leak wastes air around the clock. A regular walk through inspection with an ultrasonic detector finds leaks early and pays for itself quickly.
Ambient conditions change the output of a compressor. High intake temperature, high altitude and poor ventilation reduce flow, so the installation room should be cool, clean and well ventilated.
Downstream equipment benefits from stable pressure. A correctly sized receiver tank and good piping reduce pressure fluctuations and help the compressor run in a steady, efficient range.
Remote monitoring adds control. Modern controllers report running hours, pressure and alarms, which helps maintenance teams plan service instead of reacting to failures.