Overview
AeroWolf Group is a Sino-German joint venture stock-listed business, which is a professional China manufacturer of air compressor . As the development of economic and better to achieve sustainable development, reducing energy consumption and the dependancy on fossil fuels is our major challenge. “Energy saving first, Mutual value shared” is AeroWolf Group Slogan, and always operating on it. At present,
Key Details
one stage compression air compressor widely used in different industry for its advantage. But compared with one stage compression air compressor, two stage compression screw air compressor more energy saving as below information: (1)Lower compression ratio. (2)less impact on bearings and other accessories. (3)more stable output performance. (4)higher energy efficiency. (5)lower energy consumption. Hereby supply a example to you better understanding of its advantage: DA-160 VS DA-132+ With the same operating pressure 7.5bar, and the voltage are 380V/3ph/50hz A: DA-160 air delivery is 27.36m3/min Motor Power is 160kw Total power consumption at full load: 175kw Specific power=Total Power consumption/Air delivery=175kw/
Practical Points
27.36m3/min= 6.4kw/(m3/min) B: DA-132+ air delivery: 26.78m3/min Motor Power is 132kw Total Power consumption at full load: 156kw Specific Power= Total Power consumption/Air delivery=156kw/26.78m3/min=5.82kw/(m3/min) Based on the data mentioned above, let’s assume that the compressor units will operate 24 working days a day and 300 days a year, so the power consumption will be the following: DA-132+ DA-160 Power consumption of each unit 5.82kw/(m3/min) * 26.78m3/min* 24 running hours per day * 300 running days per year= 1122189KW.H 6.4kw/(m3/min) * 26.78m3/min* 24 running hours per day * 300 running days per year= 1234022KW.H Power consumption difference If the end user use two units for 24 working days a day and 300 days a year, the saved power by choosing Proposal A will be=1234022KW.H – 1122189KW.H= 111833KW.H As we can see the power consumption difference above, two stage compression air compressor more energy saving and will be a new trend in future.
What This Means for Buyers
Energy cost is usually the largest share of a compressor total cost of ownership. In many industrial plants, electricity represents 70 to 80 percent of lifecycle expense. Choosing an energy efficient machine and controlling leaks can cut this cost substantially over a five to ten year operating life. Operators should record pressure, temperature and running hours daily. A small change in these readings often signals an issue before a failure occurs, which is cheaper to fix than an emergency repair.
How to Select the Right Equipment
Start with the actual air demand. Record the required flow, working pressure, voltage, ambient conditions and duty cycle, then add a safety margin. Match the compressor type to the application. A variable speed drive machine suits changing demand, while a fixed speed machine suits steady full load. For clean processes, an oil free unit or proper filtration is required.
Common Mistakes to Avoid
- Sizing a compressor from the motor nameplate instead of measured flow.
- Ignoring air quality and allowing water or oil into the system.
- Skipping preventive maintenance and waiting for a breakdown.
- Choosing the lowest price without comparing lifecycle energy cost.
Maintenance and Reliability
A routine service plan keeps output stable and protects the airend, motor and controls. Drain condensate, change filters on schedule, check belts and couplings, and inspect for leaks. A well maintained compressor holds its efficiency and avoids costly unplanned stops.
Next Steps
For help selecting or sizing a system, review the Screw Air Compressor and Compressed Air Solutions, or contact AeroWolf with your flow, pressure and air quality requirements.
A clear specification avoids expensive rework. Document the air quality class, the peak and average flow, the pressure band, the power supply and the expected operating hours before asking for a quote.