Working principle of double screw air compressor

Overview

The operating capacity of a double screw air compressor consists of a pair of rotor teeth that are parallel to each other and are meshed with each other and a housing containing the pair of rotors. When the machine is running two rotor teeth each other and inserted into the other tooth with rotation of the rotor tooth inserted into

Key Details

the other slot to the exhaust volume of the mobile terminal, by the other teeth closed gradually narrowed, the pressure gradually increased, until it reaches the required pressure, the tooth side communicates with the exhaust port, exhaust to achieve. When the teeth are meshed with each other, the teeth are inserted to form two spaces separated by teeth, and the alveolar teeth near the suction end are inspiratory volume, which is the volume of compressed gas near the exhaust end. With the operation of the compressor, the other rotor tooth insert tooth moved toward the exhaust end of the suction

Practical Points

volume expanding, shrinking volume of compressed gas, so as to realize the compression process in each slot suction, when compressed gas in alveolar pressure reaches the required exhaust pressure, the exhaust orifice is communicated with the slot just start the exhaust process. The variation of the suction volume and the compression volume divided by the teeth of the opposing rotor is repeated, so that the double screw air compressor can continuously inhale, compress and exhaust air.

What This Means for Buyers

Preventive maintenance keeps a compressed air system reliable. Regular filter changes, condensate draining, belt tension checks and airend inspection reduce unplanned downtime and help the machine keep its rated efficiency year after year. Operators should record pressure, temperature and running hours daily. A small change in these readings often signals an issue before a failure occurs, which is cheaper to fix than an emergency repair.

How to Select the Right Equipment

Start with the actual air demand. Record the required flow, working pressure, voltage, ambient conditions and duty cycle, then add a safety margin. Match the compressor type to the application. A variable speed drive machine suits changing demand, while a fixed speed machine suits steady full load. For clean processes, an oil free unit or proper filtration is required.

Common Mistakes to Avoid

  • Sizing a compressor from the motor nameplate instead of measured flow.
  • Ignoring air quality and allowing water or oil into the system.
  • Skipping preventive maintenance and waiting for a breakdown.
  • Choosing the lowest price without comparing lifecycle energy cost.

Maintenance and Reliability

A routine service plan keeps output stable and protects the airend, motor and controls. Drain condensate, change filters on schedule, check belts and couplings, and inspect for leaks. A well maintained compressor holds its efficiency and avoids costly unplanned stops.

Next Steps

For help selecting or sizing a system, review the Screw Air Compressor and Compressed Air Solutions, or contact AeroWolf with your flow, pressure and air quality requirements.

A clear specification avoids expensive rework. Document the air quality class, the peak and average flow, the pressure band, the power supply and the expected operating hours before asking for a quote.

Compressed air is one of the most common utilities in a factory, yet it is often the least audited. A pressure of 0.1 bar above the requirement already adds measurable energy cost across a full year of operation.

Leakage is a hidden cost. Even a small leak wastes air around the clock. A regular walk through inspection with an ultrasonic detector finds leaks early and pays for itself quickly.

Ambient conditions change the output of a compressor. High intake temperature, high altitude and poor ventilation reduce flow, so the installation room should be cool, clean and well ventilated.

WhatsApp Email Phone